Taping Solutions

FTM - Flexible Taping Machine

The FTM - Flexible Taping Machine, is a workbench taping system for performing spot taping to insulate or bundling splices and/or wires.

It has a typical processing time of 1.8 seconds.

The FTM is an all-in-one machine, since its possible to process normal and end-splices in the same machine.

Also, it can be used with a centering system that ensures that the tape is applied always in the middle of the splice.

The control module is separated from the taping head, which allows for a compact design that results in a more ergonomic use and more free space in the workbench.

FTM-TP - Flexible Taping Machine - Twisted Pairs

The FTM-TP: Flexible Taping Machine - Twisted Pairs, is a spot taping machine especially developed for:

- High speed taping: 1.8 sec;

- Small diameters bundles;

- Tape saving (minimum 20 mm per spot tape);

- Small tape widths (9 to 19 mm);

- Minimum distance spot tape to the cable edge 17 mm;

- OPC-UA Communication to connect to MES servers.

STM - Simple Taping Machine

The STM, Simple Taping Machine, is a spot taping machine designed to perform spot taping to insulate or bundling splices and/or wires.

It has a typical processing time of 3 seconds.

The machine is fully pneumatic, not requiring electrical connections.

The process starts by the operator putting the bundle into the machine and moving the cables inside it. This action initiates the taping automatically.

The quantity of tape is adjusted using a fast screw.

Low maintenance, full adjustable and cost efficient machine.

ITM - Integrated Taping Machine

The ITM is a taping machine, assembled in a XY axis system, which can be integrated in other in-line processes and that performs several spot tapes or continuous taping along a cable, a cable bundle or any other material that needs to be taped.

The number and positions of the taping places are fully configurable. These parameters are combined into a program, which is stored in memory and activated when requested by an external machine.

Each tape operation can be configured with it's own parameters.

The entire spot tape process (positioning and tape) is done in only 4 seconds. For continuous tape, the speed is 100 mm/s.

The machine can be supplied with a complete structure to be fully and easily integrated into an existing production line, or simply the taping module can be integrated into an existing machine.

It is connected to other machines by MODBUS/TCP (or other protocol if desired), receiving from the master controller the program ID and the start signal. Once it finishes, it returns the feedback signal, indicating the result of the taping process.

DLT - Double Layer Taper

The DLT- Double Layer Taper, is a workbench taping machine to produce double layer tapes from 2 single layer tapes.

The use of double layer tapes in the taping process of wire harnesses has many advantages, being the most important the fact that the glue will not stick to the wires, allowing free movement and flexibility of the cables.

The machine allows to produce double tapes with different configurations, stored in pre-defined programs. It is possible to define the overlap of tapes, the diameter of tapes and the desired length of the final tape. It also allows to process tapes with different widths and to adjust the speed of reeling.